Please leave a message
5.0 BLE CAN Adapter
BLE 5.0 standard

1.Brief introduction:

    Bluetooth CAN adapter is bridge product that connect industrial field CANBUS to Bluetooth network.

    As a replacement solution of cable, it can transfer CANBUS data to Bluetooth wireless net work.

    Any classic Bluetooth device(PDA, Phone, Bluetooth serial adapter to Bluetooth PC) can add to CANBUS via Bluetooth CAN adapter;

    inquiring mode of devices working in CANBUS and check different kinds of data.

    Meanwhile, CAN adapter is of plug and play to achieve transparent transmission.

    Bluetooth CAN adapter offers security authentication function.

    If user set to use security authentication function, the device plan to connect to adapter must process authentication.

    If one pair of Bluetooth CAN adapters work together, authentication will automatically operate(default password: 1234).

    Following is typical application of Bluetooth CAN adapter.

2.Technical specification:

Bluetooth port electronic characteristics

Standard BLE 5.0 standard
RF output power CLASS 2
Working frequency ISM frequency 2.400~2.483GHz
Spectrum extension FHSS
Antenna On-board antenna
Sensitivity < -95dBm at < 0.1% BER
Achieved protocols LL, MP, L2CAP, ATT, GAP, GATT
Working mode Master and slave
Security Security authentication, data encryption
Maximum working distance 10M in open air

CAN port electronic characteristics

Transmission mode Differential signal
Transmission medium Twisted pair or other
Node number 112
Communication interface Isolated CAN
Connector DB9 Male
Signal pin CAN-H,CAN-L,GND
Maximum common mode voltage +5V
Minimum common mode voltage 3.6V
Differential signal input range 0V~5V
Receiver input sensitivity 900mV
Receiver input impedance ≥20kΩ
Supported CAN baud rate 15K~1M
Supported CAN working mode OSM、Not OSM

Electrical characteristics of the whole device

Power External power adapter or DB9 port, 6V 250mA rated current
LED indicators Power, connection mode , working mode
High energy transient noise protection 400W
ESD ±30 kV IEC 61000-4-2 Contact discharge
±15 kV IEC 61000-4-2 Air gap discharge
±15 kV EIA/JEDEC Human body model
Working environment Operating temperature -20℃~+80℃
Storage temperature -40℃~+125℃
Humidity < 90%
Size 99(L)*34(W)*17(H) mm

3.Power consumption:

Bluetooth port electronic characteristics

Mode Testing conditions (slave device) Max mA Min mA
Work With data transmission 30.0 21.0
Stand by Without data transmission 21.0 15.2